Threaded Lifting Loop |
| Threaded Lifting loops can be used with all sizes of threaded
inserts. They are the most economic lifting loop and are suitable
for most applications, particularly site operations. They are not
suitable for turning/pitching. They may be reused subject to the
inspection procedure, detailed below, but they are not
recommended for severe re-use conditions. |
| Threaded Lifting loops should only be attached to the unit after the
concrete strength has reached 15 N/mm2. In some cases it may
be economic and practical to leave the loops with the unit until
final installation. |
| Threaded Lifting loops are manufactured from high grade steel
wire, swaged in a steel ferrule and finished with zinc plating.
They are clearly marked with their SWL. The thread type is
Rd/M, which is compatible with both metric and Rd inserts. |
| Threaded Lifting loops are suitable for use with inserts cast in flush
with the face of the unit, or recessed using the recess formers
shown opposite. |
