Frimeda Rapid Lift System - TPA |
| The Frimeda Rapid Lift System consists of a steel anchor set in the concrete and a lifting hook (ring clutch). The precast concrete element is raised and transported by means of a ring clutch which locks into the cast-in anchor. The design of the system permits a pulling load from any direction. The ring clutches can be released either by hand directly at the clutch head, or by remote control. |
| As with all handling systems, the safe use of our system depends on a thorough knowledge of how to select and use the individual system components. This dimensioning aid and operating manual supplies all the necessary data and information, arranged in order of use during the construction process. If used properly, our system will always guarantee that precast concrete units can be handled in a safe and simple manner. |
|
Frimeda Rapid Lift System - the Advantages |
Frimeda Rapid Lift System - Description |
| FRIMEDA's Rapid Lift System consists of a steel anchor set in the concrete and a lifting hook (ring clutch). The precast concrete element is raised and transported by means of a ring clutch which locks into the cast-in anchor. The design of the ring clutches and anchors permits a pulling load from any direction. The ring clutches can be released either by hand directly at the clutch head, or by remote control. |
| The FRIMEDA Rapid Lift System components are classified by load groups. Each load group corresponds to the load limit of a ring clutch to which anchors with various rated loads are allocated. The allocation of rated loads to load groups and ring clutches is shown in the adjacent table. Anchors and ring clutches cannot be mismatched, that is to say that a ring clutch cannot be assembled with an anchor of a different load group. |